How much do you know about the jacking process of Soly intelligent synchronous jacking control system? It’s okay if you don’t know, let’s take a look at the text description integrated for you.
Suoli 1000T 4-point intelligent synchronous jacking control system
1, the installation of the jack and displacement detection sensor device, the jack installation must ensure that the ground is flat, the displacement sensor installation must ensure that the pull line vertical.
2, the installation of hydraulic hoses, according to the distribution of the jack, respectively, each jack in series together, and then and hydraulic jacking pump station with hydraulic hoses connected to the outlet of the oil circuit.
3, connect the power cable will be the total power plug into the pump station and then according to the distribution of control points, respectively, the displacement detection device and hydraulic jacking pump station on the displacement detection port with a signal cable connection . Good
4, synchronous jacking before jacking, check whether the displacement sensor readings are accurate, arrange the site personnel to pull out the displacement sensor pull rope, whether the readings on the display are the same as the displacement readings pulled out by the site pull rope.
5, synchronous jacking before the implementation of the lamination button, the jack began to jacking, when the actual pressure reaches the lamination pressure value, the jack will automatically stop jacking. The set value of the laminating pressure is: the best set value is about 50% of the actual load.
6, the end of lamination, first set the target displacement, press the up button this time the jack will automatically rise, rise to the lock set target displacement automatically stop.
7, the end of lamination, first set the target displacement, press the down button this time the jack will automatically fall, down to the lock set the target displacement automatically stop.
8, single-action operation: single-action switch to the left position, and then up, down button. If you need to stop press the stop or total stop button.
