SOLY ZCD Series Electric Hydraulic Jack For Pile Foundation Inspection Features
- Fast double-acting hydraulic reset improves jacking speed.
- Guide cap inside and piston part welded copper, not easy to pull cylinder.
- Hard chrome plating on piston rod prevents corrosion and strain.
- Dust-proof ring design prevents the inside of the cylinder from being contaminated.
- Equipped with 3/8″-18NPT quick coupling and thread protection sleeve.
- Hydraulic self-locking device can be equipped, which can support for a long time, safe and reliable.
Products
A wide variety of pile load testing procedures exist to determine the suitability of pile and one of them is the Static Load Tests that measure the response of a pile under an applied load and are the most accurate method for determining pile capacities. The purpose of such tests is to verify that the load capacity in the constructed pile is greater than the nominal resistance (Compression, Tension, Lateral, etc.) used in the design. The static pile load test gives the most accurate indication of the capacity of the in-place pile. It is performed using a reaction method. The test procedure involves applying an axial load to the top of the test pile with one or more hydraulic jacks. Various forms of instrumentation are installed into the test and anchor piles so that an accurate measurement of the test pile displacement can be obtained.
To perform the test is needed to have the correct equipment, SOLY provide the hydraulic equipment necessary to carry on the tests:
Hydraulic jacks normally are used double acting type and the tonnage depend on the force that is needed to be applied – they can be 100 ton – 200 ton – 400 ton … up to reach the desired tonnage.
Part of the system are also all flexible hoses,pump, valves, and additional connection.
SOLY machinery for you to provide all kinds of hydraulic products customised services, if you need to contact SOLY engineers!
SOLY ZCD Pile Load Testing Hydraulic Jack: Precision and Reliability in Foundation Assessment
The SOLY ZCD Pile Load Testing Hydraulic Jack is a specialized tool engineered to facilitate accurate and efficient load testing of foundation piles. Its robust construction, high-pressure capabilities, and user-friendly design make it an indispensable asset for geotechnical engineers and construction professionals aiming to assess the load-bearing capacity of piles with precision.
Key Features
- High Load Capacity: The SOLY ZCD Hydraulic Jack is designed to exert substantial force, enabling it to test piles under significant loads. This capability ensures comprehensive evaluation of pile strength and stability.
- Durable Construction: Manufactured from high-strength materials, the jack is built to withstand the rigors of field testing environments, ensuring longevity and consistent performance.
- Compact and Portable Design: Despite its powerful performance, the jack features a compact design that facilitates easy transportation and setup on-site, even in confined spaces.
- Precision Control: Equipped with a finely tuned pressure release valve and accurate pressure gauge, the SOLY ZCD allows for precise control and monitoring during load testing procedures.
- Versatile Application: The jack is compatible with various pile types and testing setups, making it suitable for a wide range of geotechnical investigations.
Operation and Usage
Operating the SOLY ZCD Pile Load Testing Hydraulic Jack involves the following steps:
- Setup: Position the jack atop the pile to be tested, ensuring it is aligned correctly and securely anchored. Connect the jack to a compatible hydraulic pump using appropriate high-pressure hoses and fittings.
- Calibration: Before testing, calibrate the system to ensure accurate pressure readings and load applications.
- Load Application: Gradually apply load to the pile by operating the hydraulic pump, following the specific testing protocol. Monitor the pressure gauge and displacement measurements closely to ensure controlled loading.
- Data Collection: Record all relevant data, including applied load, displacement, and time intervals, to analyze the pile’s performance under load.
- Release and Reset: After testing, carefully release the hydraulic pressure and disassemble the setup. Prepare the equipment for subsequent tests or storage.
Packaging and Delivery
Each SOLY ZCD Pile Load Testing Hydraulic Jack is packaged with care to ensure it arrives in optimal condition:
- Protective Packaging: The jack is encased in durable materials to shield it from damage during transit.
- Documentation: A comprehensive user manual, including operation instructions, safety guidelines, and maintenance schedules, is included to assist users in effectively utilizing the equipment.
- Accessories: Optional accessories, such as extension hoses or additional fittings, are available upon request to enhance the jack’s versatility.
